Tuff Toe Pro

Tuff Toe Pro is an abrasion, chemical, and water-resistant polyurethane adhesive specially designed to provide long-term protection for your shoes.  

While Tuff Toe was designed with softball and baseball pitchers in mind, it is also suitable to apply to other shoes to provide protection from wear and tear.

Tuff Toe is applied as a thick 2-part epoxy/polyurethane and cures to form a durable yet flexible protective layer with a permanent bond. It contains enough material to cover the toes on two shoes with a standard application (See below). It can even be applied over shoe soles.



  • Please esnrue that you follow the directions below.
  • Ensure that the footwear this will be applied to is appropriate for your needs and fits. Once this product is applied you will not be able to return or exchange it.


Easy Application - bonds to anything

Tuff Toe Our can be applied at home with a steady hand (see instructions below, and watch videos provided). With proper surface preparation, Tuff Toe will bond to leather, steel, rubber, vinyl, cloth, canvas, cork, wood, and many other surfaces.


Works on All Footwear

Tuff Toe is not just for cleats. It also repairs soccer, football, lacrosse, and track cleats as well as tennis, golf, basketball, running, boat, skate, and climbing shoes. Works on ice, roller and hockey skates, rollerblades, sandals, flip flops, crocs, slippers, sneakers, boots, and all types of footwear. It’s non-marking and can be used to repair soles and heels as well.


Application Process

NOTE: Prior to applying Tuff Toe ensure the footwear is the correct size. Footwear cannot be returned or exchanged once Tuff Toe has been applied.

The key to a successful Tuff Toe application is:

  • Watch the videos
  • Read the instructions
  • Good Preparation
  • Equalise the cartridge


Video’s to watch to show you what to do.






Glossy vs Matt Finish

Do you want a glossy finish to your Tuff Toe or matt? Watch this video to see how to finish your Tuff Toe application with a matt finish.



It is beneficial for two people to apply Tuff Toe.


STEP 1: MARK AREA – Use marker to make an outline of the area to be protected.

STEP 2: PREP – Clean and sand (with sandpaper) the area well

STEP 3: EQUALIZE CARTRIDGE & TIP – Tuff Toe is a two-part application that needs to mix simultaneously at the time of application. If the parts are not equal, the application will fail. To ensure equalization, push material out of both cartridges until they are both extracting equally into the mixing nozzle.

STEP 4: APPLY BASE – Apply to base first and use the stick provided to smear evenly.

STEP 5: APPLY TO TOE – Use a fresh mixing tip. Apply from the corner down immediately remove the tape. Pull carefully so that you don’t mess up your application.

STEP 6: ROTATE – Rotate the cleat for 1-2 mins with the toe tip pointed down to allow the material to spread evenly and avoid runs.

STEP 7: CURE FOR 24 HOURS – Material will be 80% cured after 90 minutes, but please allow 24 hours for a full cure.

Brand Tuff Toe